A-LevelPhysicsMagnetic fields9702/43 · May/June 2020 · Q910 Marks

A coil of wire is situated in a uniform magnetic field of flux density B. The coil has diameter 3.6 cm and consists of 350 turns of wire, as illustrated in [Figure 9.1].

(a)(i)The variation with time t of B is shown in [Figure 9.2]. Show that, for the time t = 0 to time t = 0.20s, the electromotive force (e.m.f.) induced in the coil is 0.080 V.[2]
(a)(ii)On the axes of [Figure 9.3], show the variation with time t of the induced e.m.f. E for time t = 0 to time t = 0.80 s.[4]
(b)A bar magnet is held a small distance above the surface of an aluminium disc by means of a rod, as illustrated in [Figure 9.4]. The aluminium disc is supported horizontally and held stationary. The magnet is rotated about a vertical axis at constant speed. Use laws of electromagnetic induction to explain why there is a torque acting on the aluminium disc.[4]

This question uses a diagram from the original paper, which isn't shown here. Open the full paper from the past papers archive to see it.

Mark scheme

Marking points from the official mark scheme (May/June 2020). The mark or mark type is shown in brackets.

[C1] e.m.f. = (Δ)Φ / t OR (Δ)B × AN / t
[A1] = 45 × 10⁻³ × π × (1.8 × 10⁻²)² × 350 / 0.20 = 0.080 V
[B1] 0 to 0.2 s: straight horizontal line at 0.080 V OR -0.080 V
[B1] 0.2 s to 0.4 s: zero
[B1] 0.4 s to 0.8 s: straight horizontal line at 0.040 V OR –0.040 V
[B1] opposite polarity to 0 to 0.2 s line
[B1] either disc cuts flux lines (of the magnet) OR there is a changing flux in the disc
[B1] (by Faraday's law) e.m.f. is induced in the disc
[B1] e.m.f. causes (edd y) currents in the disc
[B1] current in the magnetic field (of the magnet) causes force on disc

On Oracle Prep you can write or photograph your own answer and have it marked by AI against this mark scheme, with feedback on what you missed.